| |
| | |

Han Ming Jie! Board

 Forgot password?
View: 2330 | Reply: 1

Set share folders for Windows

[Copy link]








Rank: 7Rank: 7Rank: 7

Post time: 2017-01-24 09:58:41
|Show all posts
本帖最后由 yujia 于 2017-02-02 11:13 编辑

How to use the Simple File Sharing feature to share files in Windows XP

Sharing Files

The owner of the file or folder and local Computer Administrators have read and write permission to the file or folder. Nobody else may read or write to the folder or the files in it. This is the default setting for all the folders and files in each user's My Documents folder. If it’s disabled, please use the following steps to enable it.
  • Select a folder in windows explorer.
  • Right-click the folder, and then click Sharing and Security.

3. If the window is like the screenshot below, file sharing is not enabled. Click the link highlighted to enable file sharing.


Share folders

Files are shared for everyone to read on the network. All local users, including the Guest account, can read the files. But they cannot modify the contents. Any user can read and change your files.
  • Select a folder in windows explorer.Right-click the folder, and then click Sharing and Security.
  • Click to select the Share this folder on the network check box, click to clear the Allow network users to change my files check box, and then click OK.


Local NTFS Permissions:
Owner: Full Control
Administrators: Full Control
System: Full Control
Everyone: Read
Network Share Permissions:
Everyone: Read

How to use the Simple File Sharing feature to share files in Windows 7

Windows 7 and Windows 8.x have the same network sharing settings. They are found in the same place, but their order is different and so is their grouping.
To find them, go to the “Control Panel > Network and Internet” and then to “Network and Sharing Center”. This window is very important when it comes to setting up your network connections and network sharing. Here you will find the options for changing your network adapter settings, a link to all network sharing settings, and wizards for setting up new connections or troubleshooting problems.

To access your network sharing settings, click or tap the “Change advanced sharing settings” link on the left column.


Now you will see a list with all the available network sharing settings that are found in Windows, grouped by network location.


Share folders

Sharing a folder in a network
Conventionally, you can most easily clear folders or drives for network use in Windows 7 with these steps:
1. Right-click on the folder/drive that you wish the share and select “Properties”.
2. Select the tab “Sharing” and click on “Advanced Sharing...”
3. Tick the box “Share this folder” and enter a a share name for it.
4. Click on permissions, mark the group entry “Everyone” and configure the network permissions for this folder in the lower field according to your requirements. If you just want to release your files for copying, allowing “Read” is usually enough.


Find Windows User Name and Password

To go to your user accounts:
1. Go to the Control Panel from the Start Menu.
2. Click Add or remove user accounts.


3. The Manage Accounts pane will appear. You will see all of the user accounts here, and you can add more accounts or manage existing ones.The Manage Accounts pane will appear. You will see all of the user accounts here, and you can add more accounts or manage existing ones.


To create a new account:
1. From the Manage Accounts pane, click Create a new account.
2. Type an account name.


3. Select Standard user or Administrator.
4. Click Create Account.

Find computer IP Address

  • Go to the start menu and type command in the box. Then right-click on Command Prompt and click Run as administrator. If a User Account Control window pops up, click Continue.



2.  At the C:> prompt type ipconfig . Then press Enter. Your IP address, subnet mask and default gateway will be returned to you. If your IP address is 192.168.x.x, 10.x.x.x, or 172.16.x.x, then you are receiving an internal IP address from a router or other device. The IP address that the world sees is that of the router. If you are receiving a 169.254.x.x address, this is a Windows address that generally means your network connection is not working properly.


Turn off the Firewall

If you can not access the shared directory, check your firewall settings to prevent access to shared directories.



Use magic Report

You have to log in before you can reply Login | Register

分享到: 微信 更多

Mobile| Han MingJie

2019-09-19 06:06 GMT+8 , Processed in 0.336848 sec., 30 queries .

Powered by Discuz! X2.5

Release 20130426, © 2001-2019 Comsenz Inc.

MultiLingual version, Rev. 166, © 2009-2019 codersclub.org

To Top